Sword Art Online: Alicization - Eugeo Blue Rose Sword Assembly (Oversize Scale Version)

This sword assembly was Sword Art Online: Alicization; Eugeo owned this Blue Rose Sword.

The sword full length 1.6 meter long (Overscale) , required additional material as below:

**** Note: The assembly quite a tight tolerance ! ****

1. Aluminium Flat Bar 20mm x 10mm x 1000mm (length), Required to drill 7.1m hole x 50mm deep & Tapping M8 x 1 thread.

Link:
https://www.ebay.co.uk/itm/Aluminium-Flat-Bar-many-size-choose-Length-up-to-500mm-to-2000mm/252550214551?ssPageName=STRK%3AMEBIDX%3AIT&var=551457392121&_trksid=p2060353.m2749.l2649

2.M8 x 1 Stainless Steel Threaded Rod x 400mm Length

Link:
https://www.ebay.co.uk/itm/M8-8mm-A2-STAINLESS-STEEL-THREADED-BAR-ROD-IN-DIFFERENT-LENGTHS-100mm-1000mm/360940234989?ssPageName=STRK%3AMEBIDX%3AIT&var=630290553429&_trksid=p2060353.m2749.l2649

3.M8 Nut x 2

Link:
https://www.ebay.co.uk/itm/Metric-Fine-Pitch-A2-Stainless-Steel-Hexagon-Full-Nuts-M8-M10-M12-M14-M16-M20/291302785486?hash=item43d2ffc1ce:m:mBhCxrCqKnefSmmqo2FV91w:rk:5:pf:1&frcectupt=true

---

Update: 16/03/2019***

Fixed the blade tolerance issues C1, C2, C3, C4, C5 & C6
Fixed the girp tolerance issues A1 & A2

Update: 24/02/2019***

My Print Setting on Cura:
Print Speed 35-42mm/s (depent on the machine)
Layes: 0.22mm (minimum detailing, not too crazy)
Infill: 36-42% (Maybe abit overkill, but i like the weight)
Support: Yes 43-60deg
Raft: Yes
Print Temp: 208-212C

Total Assemblies:
14 Parts (Each Part about 180mm height)
The Widest Part 124mm
Parts Tolerances : 0.2mm - 0.25mm (on my machine)

If your machine size like mine 220 x 220 x 250mm, surely no problem at all

Finally, if you look after to print with simliar spec as i do, the print Hours/Day you looking for.............

Part A Section:
A1 & A2 - 1 day 53 mins
A3 & A4 - 19 hours 17 mins

Part B Section:
B1 - 21 hours 22 mins
B2 - 10 hours 55ms
B3 - 1 day 1hour 43mins
B4 - 3 hours 53mins

Part C Section:
C1 - 22 hours 21 mins
C2 & C3 - 1 day 13 hours 47 mins
C4 & C5 - 1 day 7 hours 42 mins
C6 - 10 hours 12 mins

Good Luck All & Enjoy !!

Thank You !