FT Simple Cub Landing Gear (Timber style)

30/03/2020: The design has been updated to make the original hinges on the centre plate thicker and stronger. The prints have been re-orientated to an ideal printing position. A trimmed down version has also been made available.

Early 2019: This is V2 of my landing gear for the FT Simple Cub, based on the Timber gear, you'll need some 4mm bolts for the wheels, and optionally 3mm or 4mm bolts plus washers for the hinges, setting the wall thickness to 2mm will leave enough for these to be drilled out to 4mm.

Add rubber bands as needed.

Further versions will be added as the weather improves to allow for testing to destruction.

Happy flying