Housing for a PIR sensor with different apertures for mounting in a false ceiling.

Gehäuse für einen PIR-Sensor mit verschiedenen Blenden zur Montage
in einer Zwischendecke.

---

Sonoff-Rule:

1 PIR:

on switch1#state do ruletimer1 %mem1% endon
on switch1#state do power1 on endon
on rules#timer=1 do power1 off endon

2 PIR:

on switch1#state do ruletimer1 %mem1% endon
on switch2#state do ruletimer1 %mem1% endon
on switch1#state do power1 on endon
on switch2#state do power1 on endon
on rules#timer=1 do power1 off endon

3 PIR:

on switch1#state do ruletimer1 %mem1% endon
on switch2#state do ruletimer1 %mem1% endon
on switch3#state do ruletimer1 %mem1% endon
on switch1#state do power1 on endon
on switch2#state do power1 on endon
on switch3#state do power1 on endon
on rules#timer=1 do power1 off endon

Config

After creating the rule you have to enter "mem 120" via the Console.
This sets the switch-off timer to 120sec. The PIR can retrigger.
The timer can be changed through the console or HTTP call.
I change the running time between 60 and 300sec depending on the
time of day through my Iobroker.

Nach dem erstellen der Rule muss über die Console "mem 120" eingegeben
werden. Dies stellt den Ausschalttimer auf 120sec. Der PIR kann retriggern.
Der Timer kann dadurch über die Console oder HTTP-Aufruf geändert werden.
Ich ändere die Laufzeit je nach Tageszeit zwischen 60 und 300sec durch meinen
Iobroker.