May 6, 2019
Description
Adapter plate to allow the Duet Maestro or Duet 3 Mini 5+ board to mount in the stock Ender 3 Pro electronics enclosure. Use the Ender 3 screws to bolt the adapter down to the Ender 3, and then bolt the Maestro down to the adapter using 4x M3 6-10mm bolts.
Front panel will need a bit of invasive surgery to get new holes cut out for the Maestro ports. bolt
I used mntbighker's design as inspiration. I wasn't sure if it would fit in the Ender 3 Pro case, so I redid it in Fusion 360 with my own measurements, and they seem to match. I also slimmed it down to use as little plastic as possible. CAD files included.
Used as part of the Duet Maestro Ender 3 Pro upgrade guide: https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37
License:
Creative Commons - Attribution
Phaedrux
