Summary

Cabinet-/Restroom-/Toilet-/Quick-Lock profile-cylinder for standardized (european) door locks with a PZ ( German = Profilzylinder = Profile cylinder) opening for locking-cylinders.

This measurment is for 40 mm wooden doors but should easily be used for aluminium/aluminum or other cabinets doors. The square is a little bigger than the common size (8mm) for indoor doors.

I got it working without supports but the surface will be smoother/better if you use cylindrical supports.

The hole beneath the lever is for the fixing screw (M5-Screw)
No need for the hole to be threaded but go on and have fun, should work as well ;-)

!!!DO NOT USE THIS ITEM OR 3D PRINTED PARTS FOR FIRE AND PANIC DOORS!!!
These doors and all their parts need specialized approvals and are also subjected to meet certain qualifications!

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Because the part is under alot of stress while in use I recommend to set the outer wall count to 5 and the top/roof- and bottom/floor- layercount to 6 (or more) and the infill at least 50%<br>Print the item standing up, this way there shouldn't be an issue with layer adhesion while in use.</p></div>

Cabinet Lock Profile Cylinder Doorlock

Cabinet Lock Profile Cylinder Doorlock

Related Models