Comically Large Box Mod Vape Station

This model is part of a few models mostly vape related I'm releasing to the public from my data vaults most are a few years old and some are mostly just usable as assets, check my profile for other designs that may be of interest in the next few days.

If you appreciate the designs I upload please consider leaving a tip via thingiverse. A lot of time goes into some of my designs, and a lot more goes into the designs that never quite made it to thingiverse.

Have you ever wanted to chuck clouds off a 12v unregulated mosfet mod the size of your head? Have you ever wanted to share your box mod with all your friends at once? Look no farther! The most obscene box mod is within reach! With up to 1000watts of power and 5 usable atomizers this box mod is a BIG deal. But jokes aside, I had commissioned two power supply mods for a convention a few years back and they were sitting relatively unused, so I created this enclosure to rehouse the power supply and provide a little more novelty.

Parts list:
1x ATX power supply with sufficient amp rating
4x Speakon connectors
1x 510
1x 3034 mosfet and resistor
1x Power Plug
1x Rocker switch
1x Renegade X push button or similarly sized button
up to 4x vape pods (see my previous design for a dna200/250 vape pod compatible with this insanity)
Misc wire and wire shielding
Misc m3 machine screws

Print is big, so keep that in mind, I have split the body up into two portions so it can print on smaller printers though. Otherwise the prints are relatively easy prints. The fire button is split into two pieces to facilitate easy printing, just glue the fire button peg into the hole during assembly. The side cases can be printed or the way I originally made mine was I used the SVG file included to CNC out the side panels. They are simple geometry though so it would also be possible to cut them out by hand. Wiring up is pretty simple, connect the power plug to the power supply and the master power switch, run 12v rails to each of the speakon connectors and 1 more to the top of the box where you wire up a simple unregulated mosfet mod basically as normal.

Warning: The build in unregulated mod is 12v! Anything short of a purposely built coil setup ran off that circuit will inevitably ignite due to the excessive power. And if you think dry hits are bad on a normal mod, well you'll learn of a new kind of hell if you dry hit with this.