July 14, 2019
Description
Annie & Clarabel minis!
Could also be printed in different colours to be other coaches (ie, Gordon's Express).
Printed using an Ender 2 with Rigid.Ink filaments.
0.1mm resolution, 185 degrees C, 50mm/s, 20% infill, Cura.
Support must be used for the roof and also for the towing hook on the (upside down) base.
Eye pupils and mouths drawn on with a fine-line marker but decals would be a better option, if available. The axles are 1mm diameter safety pins, cut to 24mm lengths with some pliers, glued to a wheel at each end.
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
JoePineapples
