July 22, 2019
Description
These are the files for the RC bobcat i designed!!!!!
There is a video if you want more info!!!!
https://www.youtube.com/watch?v=P_tvqk8mg5A&feature=youtu.be
i would love to have some feedback on the designs if anyone has any ideas
there is lots of information on the video so check that out, but basically there is not many options out there for rc bobcat's and i think they are the ideal digging machine, so i designed my own!!!
It is pretty awesome but not to cheap.
This has 3D printed wheels on it, but the motors use an adapter which has a 12mm hex so any rc wheels will fit. I designed the 3D printed ones because of the deep wheel insert and the weight of the bobcat is pretty heavy and needed more support for the skid steering.
you need the one with 6mm shaft
This makes for a very strong drive train with no weak driveshafts and cogs
This is the bec
https://www.modelflight.com.au/castle-10a-peak-bec.html
This it the big servo i used
https://www.modelflight.com.au/hitec-hs-d845wp-monster-torque-32-bit-programmable-high-response-wide-vol.html
This is the bucket servo
https://www.banggood.com/search/spt-servo.html
This is the esc i'm going to install to give it more power!!!
https://www.modelflight.com.au/dynamite-wp-60a-fwd-rev-brushed-esc.html
and these are the motors
https://www.banggood.com/DC-12V-100rpm-Worm-Gear-Reduction-Motor-Metal-Gear-Box-High-Torque-Motor-p-1052858.html?rmmds=detail-left-hotproducts__4&cur_warehouse=CN
If anyone does make one of these i would love to see some pictures!!!!!!
THANKS FOR WATCHING ULTRA RC!!!!!
visit my channel for other awesome videos!!!
https://www.youtube.com/channel/UC1DCkhF5LrCuNeDbYBAV45w
Intro music!!!!
Rock Intro 3 by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/
and on Facebook!!!!
https://www.facebook.com/ultrarcvideos/
BY FOR NOW!!!
License:
Creative Commons - Attribution
ultrarc
