Flying extruder bracket for FLSun delta

This is a bracket to attach a flying extruder to a FLSun delta. It uses the existing hole on the top of the carriage. (I think these were used to adjust the endstop switches at some point, but recent printer firmwares have made this redundant). It has a 4 mm hole for the extruder attachment - the 3mm OD silicone elastic cord (sold at the local garden center) with a 2.9mm screw screwed into it fits snugly. The same 2.9mm screw will fit just fine into the aforementioned hole, but a 3mm bolt will probably work as well.

You may want to move your endstop switches up a few mm, as this will otherwise reduce your max. build height with about 5mm. Also, you will need to re-calibrate your printer.