Tile overlay replacements for Gloomhaven (MagHex compatible)

Update - Adding furniture as I remix and test print each one.

Working my way through printing and painting Xevin's excellent MagHex system.

Adapted these beautiful little tile overlay replacements from RobagoN to include holes for the 3x3mm axial magnets called for in the MagHex system.

Magnets need to be oriented the same way and connecting to the MagHex center mag tiles. I use a painter's scraper help keep the magnets in place and facing directions I need them when pressing magnets in.

Check originals for suggested print settings, almost all print very well without supports and need little cleanup after printing to remove nozzle tails and any stringing.

Thanks Xevin and Robagon!

The list:

Thing by Author, Change, Print count.

• Sarcophagus for Gloomhaven (Grey) by Robagon, Added spaces for 2 3x3mm magnets, 3x.
• Sarcophagus for Gloomhaven (Yellow) by Robagon, Added spaces for 2 3x3mm magnets, 3x.
• Table for Gloomhaven by Robagon, Added spaces for 2 3x3mm magnets, 3x.
• Wooden Crate for Gloomhaven by Robagon, Scaled stacked and 3x3mm magnet hole, 2x.