QU-BD Extruder Modifications

My QU-BD extruder was stopping a lot so I made some modifications. The primary problem was the way they push the filament against the drive gear with a set screw. I switched to a spring loaded idler pulley. This will work with the stock QU-BD drive gear, but I switched to an MK7 style drive gear. The extruder is super reliable now.

There are two versions of the parts to allow you run the filament through the right side or left side. You need a 4mm I.D. x 13mm O.D x 5mm thk bearing (624), a button head 4mm x 10 screw, a 4mm washer and a spring. I used a 3/8" x 1-1/8" x 0.047 spring from a Home Depot assortment pack. The other parts are available a lot of places, but I bought mine at McMaster Carr.

It all fits within the width of the motor, so two can be run side by side.

I have a wiki page of all the things I did to tune up my QU-BD extruder here... http://www.buildlog.net/wiki/doku.php?id=ord_bot:qu-bd_extruder_improvements