September 3, 2019
Description
camera stabilizer remixed from https://www.thingiverse.com/thing:672295
bearings were moved to outside to allow better tightening and assembly without zip ties.
bearings are 4x 625z.
1 inch bolts with dab of hotglue on end of threads or some locknuts, diy can be made with vice and hammer with a smack. also use a jet lighter on the plastic if you have issues with the center ring getting the bearings in.
https://www.thingiverse.com/thing:84142 used the camera mount from here and there are some video's of another similar setup.
newer videocamera's like the sony hdr-cx240 series iirc have an automatic stabilizer in it that is actually very nice already.
License:
Creative Commons - Attribution
netpipe
