Amiibomb (Amiibo/Arduino cloning) case

Custom case to house an Arduino & NFC module for Amiibomb/Amiibo cloning.

Print at 200μm for best results. No supports required at this resolution.

Uses M3x5mm screws to mount the Arduino, M3x10mm self-tapping screws to secure the case halves together. Depending on the size of screw you use, the top left PCB mounting hole might not fit. Mine didn't, so it's only secured with 3 screws.

3 versions of the lid supplied; blank, logo via bridged layers, logo with inserts.
For the inserts, the STL is oriented exactly how they need to be inserted. Because of the way I made this (JPG image to SVG) they're not all exactly the same size and probably won't be swappable (i.e., each piece will only fit one hole...probably, I didn't test!).

You'll need to attach the NFC module to the Arduino somehow as there's no mounting for it on the actual case. I used a breadboard and soldered everything in place.

Software instructions can be found via Google.