009 Hudson Tipper Truck Model Railway

009 Model of a Hudson Tipper truck.
The bucket may be tipped or be horizontal.
Printed in ABS at 0.1mm. PLA or resin should also work.
All solid (100% fill) except load at 20% fill
Also needed are
2 pairs "N Gauge / 009" wheels on pointed axles (standard)
2 Greenwich couplings

Clean up base to remove squish flashing and file inside face of wheel box and wheel openings to allow smooth running. Wheels should spin freely when laid in axle box 'bearings'
Clean up flashing and clip angle on axle support and clip over wheel axles to hold in place
Assemble Greenwich couplings and glue on upper surface of base so that the loop hinges freely and the coupling face is just proud of the base edge. Adjust height to suit
Ensure bucket support tabs will engage in base.and glue in position.
Sit bucket across support beams

File out layer grooves from bucket and remove supports ( if used)