Qu Rahn's Lightsaber

Qu Rahn's lightsaber which was given to Kyle Katarn in Jedi Knight: Dark Forces II

1" diameter hole to accept most saber blades.

Print Guard x1 and H1 x3. << Without button screws/holes on guard OR
Print Guard t2 x1 and H1 x1 and H2 x2 and Screws x2. << For button screws on guard

Update 1/29/20: Added Pommel Cap
Update 4/25/20: Added Pommel Threads adapter & updated handle to have threads (You can now glue or press fit the Pommel Threads adapter into the pommel so that it can be unscrewed from the handle)
Update 9/23/20: Added Saber3 which comes with a guard that includes button screws. Added H2, Guard2, and Screws.
Update 11/16/20: Updated Handle to accept chassis
Update 12/11/21: Replaced Pommel_Threads to fit handle. Replaced Pommel to accommodate new threaded adapter. Pommel lines up square with the adapter. Replaced Emitter, choke, H1, H2, Ext, handle to provide lip that slides into each piece. Added H3.
Update 3/16/24: Added Parts List image

Clip isn't strong enough for actual use. Would recommend throwing a few bucks for a D-Ring at a hardware store.
It would also be nicer to use M4-0.70 x 8mm Button Head Socket Cap Bolts for the screws.