October 20, 2019
Description
I needed a proper location for mounting my USB camera, and decided to mount it in the back of the bed.
As you may have noticed in the first picture it did have some issues with the heated bed.
During the first print the holder bent to the back, due to overheated material.
I made some adjustments and created V2, and reprinted in PETG instead of PLA.
I made the arm a little longer too, so it bends a bit more to the back, and out of the way.
I Bought the camera on amazon here:
https://www.amazon.de/dp/B01FDCK6FS/ref=sr_1_4?keywords=usb-webcam&qid=1571567012&sr=8-4
License:
Creative Commons - Attribution
mike_something
