Summary

Front grille for matrexx 70 RGB computer case to increase airflow.
Print Settings

Printer Brand:
Anycubic
                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>All-metal Mega</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>1.5 to 2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50%</p></div></p>                                                    <strong>Filament:</strong> Generic PLA                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Disclaimer: I'm a noob to CAD and 3D Printing.</p><p>So I've designed a front mesh grille for the Matrexx 70 RGB computer case. There are some limitations due to print volume. The original is all glass and limits airflow. Printed this for about 7 to 10 bucks (canadian). </p><p>It fits flush within the recess, but there's some play left/right because the max print dimensions of the anycubic. You can adjust the width to make it fit fully in the recess and  the pegs work better that way, BUT make sure you maintain the position of the pegs if you widen the print, you can't just scale it. </p><p>I printed with different infill settings, and for the most part you can go to to 20 to 25%, BUT the pegs need a higher infill. I think with Cura you can set it to infill higher as you go up, I haven't tried that. It would be nice if the pegs were 100% infill. Use a dremmel to trim the supports. Connect the pieces together with M5 nuts/bolts or self-threading. </p><p>Update: I've beefed up the tabs. After a 5 hour print, sucked to have the tab really weak and crack. They should still clear the slots. I'd highly recommend a dremmel to trim the supports rather than trying to break them off. </p><p>Got some grommets on the way!</p></div>
Matrexx 70 Front Grille

Matrexx 70 Front Grille

Related Models
