December 11, 2019
Description
This is an extra long feather board which can be used on a Bosch GTS 10 XC table saw. All other existing feather boards are either too short or required a long time to print due to their unnecessary width.
The M6 screw stone is designed to be printed without any support. The waste layer can be simply removed with a knife.
License:
Creative Commons - Attribution
3d_sepp
![L-Boxx Label [Customazible] preview image](https://wsrv.3dprinterfiles.com/?url=https://makerworld.bblmw.com/makerworld/model/USb28597844d5814/design/709dfc66e62dc8ff.png?image_process=resize,w_400/format,webp&w=640&h=640&output=webp&q=100&n=40&default=https://makerworld.bblmw.com/makerworld/model/USb28597844d5814/design/709dfc66e62dc8ff.png?image_process=resize,w_400/format,webp "L-Boxx Label [Customazible] preview image")
