December 20, 2019
Description
This is a enclosure for the Lightkraken PoE LED driver. A version with a 30x30x10mm fan mount is provided and one without a fan.
Use #4 1/2" flat head wood screws or flat head M3 12mm wood screws for the bottom holes. The fan can be mounted with flat head #6 1/2" or M4 15mm wood screws.
I recommend to print this using PETG or ABS. PLA is not heat resistant enough for the device to run at full power. 0.3mm layer height works fine.
License:
Creative Commons - Attribution
Tinic
