December 22, 2019
Description
This video shows how to make a Wireless Trainer/Buddy Box for Flysky Transmitters. I wanted to be able to use my FlySky FS-I6X as master with a Turnigy Evolution as slave. In addition this can be used as a wireless link for my PC RC flying simulator.
The output of the trainer box is via a standard headphone socket so can easily be used with FrSky/Jumper transmitters as master. The Flysky X6B will pair with any slave transmitter with AFHDS 2A protocol. It is feasible to swap receiver for any other manufacturer, providing it has a PPM output.
A detailed video on construction can be found here
Additional Components required:
1 off MT3608 Boost Converter - http://bit.ly/MT3608_Boost
1 off TP4056 Lithium Battery Charging Board - http://bit.ly/TP4056_Charge
1 off Flysky X6B Receiver - http://bit.ly/X6B_Receiver
1 off PZEM-005 Lithium Battery Tester - http://bit.ly/PZEM-005_Batt_Tester
1 off 18650 Battery Holder - http://bit.ly/Batt_Holder
1 off SPST Rocker Switch - http://bit.ly/SPST_Rocker_Switch
1 off 3.5mm Audio Jack Socket - http://bit.ly/Audio_Jack
1 off 6mmx6mmx7mm Tactile Switch - http://bit.ly/Tactile_Switch
5 off M3 x 8 Hex Socket Cap Head Screw (DIN 912) - http://bit.ly/Cap_Head_Screws
2 off M2 x 4 Hex Socket Button Head Screw (ISO7380) - http://bit.ly/Button_Head_Screws
5 off M3 x 4mm long Brass Threaded Insert - http://bit.ly/Brass_Inserts
2 off M2 x 3mm long Brass Threaded Insert - http://bit.ly/Brass_Inserts
1 off 18650 Battery - http://bit.ly/18650_LG_MH1
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
jc9aj
