Maracaibo insert

I think the Maracaibo board game are begging for an insert. So many bags complicate the setup for the game. Not sure how i will put it all together but i start with parts that are meant to put directly on the board from storage. And the card holder. I also have the ambition to have the game board on top because that is under all the other things. Unfortunately the rulebook is a bit thicker then counted for so the lid are a few mm from being compltetly shut.

I gladly take feedback from anyone who has an idea. Im not very experience with designing stuff so stuff might take time or i need help to design it.

The picture is with gameboard in the bottom to see the height.

Cardbox
The cardbox have one side wider to be able to label the compartments. I made some extra space so hopefully sleeves Will fot for those who wants that.

• Solo cards
• Career cards
• Prestige building cards
• A cards
• B Cards
• Story cards (C cards aswell)

Cardbox sleeved

V2 the wall is moved 3 mm so thew sleeves should now be able to be 3 mm higher.
Same as above but larger holes. The things with lid need to be in the larg tray to fit this one. The holes are:
Solo 20mm
Prestige 12 mm
Career 12 mm
A 36,9mm (dont ask me how it got to a .9..)
B 60mm
Story 49 mm

53 x 91 mm sleeves fit

Combat Tiles
Combat tiles compartment was designed to fit a 19mm x 1 mm magnet in the lid and in the base but it fitted good without it. Designed with no spacing so it created a nice press fit to my print.

Questtiles
Designed to have the correct height to have the gameboard on top, i.e. same height as the card box. This made it high enough to fit the story tiles to.
The thought order of the cards are:

Synergy tokens
Designed with posibility to fit 10 mm X 1 mm magnets. Did have a good press fit.

Ownership markers
Designed to fit on the gameboard and only pressfit design.
The kid also works as a holder for discarded cubes/discs latino next to the prestige buildings.

Coinholder (Bank)
Designed to take out of the box and be a bank on the table. I noticed a problem with the smaller compartment ment for the 10 dubloon tokens that they are hard to get up. So for now i putted the 1 dubloons in the smallest. In the box it is meant to support the 4 players boxes.

The V2 is a bit smaller to be able to have ontop the player trays and have the gameboards fit between

Player boxes
Print 4 copies of this.
1 for each colour. Ment to be ontop of coinholder and support the playerboard in the box.
The V2 is 1 mm smaller to fit the playerboards better

Tray
Made for the blue bag and legacy/campaign tiles. Also a compartment for the citytiles.

Discs
A tray to have all the small discs in. Also support the gameboard.

I have an arrangement with thingiverse user early8 so he can sell copys of this insert at his etsy store.