January 6, 2020
Description
Hello everybody, I modeled (in onshape) and printed this vase during Open day in my school as a homework with 1mm nozzle. The printing itself is much more quicker than with smaller nozzle.
Here are some settings that I used:
Filament: PLA(240 °C/50 °C)
Layers: 0.5 mm
1st layer 0.4 mm
Perimeters: 2
Infill: 0%
Solid layers:
Top: 0
Bottom: 3
Speeds:
Perimeters: 25 mm/s
External perimeters: 20 mm/s
Infill: 40 mm/s
Travel: 100 mm/s
1st layer: 30 mm/s
License:
Creative Commons - Attribution
radim_kadera
