Cheap Power Supply PSU Cover for Hypercube - Remix

I remixed this thing (https://www.thingiverse.com/thing:2440784) to work with a cheap 24v PSU that you get off of AliExpress.

Uses this kind of IEC switch....

https://www.aliexpress.com/item/32912453121.html?spm=a2g0s.9042311.0.0.27424c4dNMIwUh

Also, on V2 I added a couple of supports for the hole where the plug/switch goes. If your printer is OK bridging this should print fine and can be cut out with flush cutters.

Finally, I am using M4 x 6mm screws from Menards to hold everything together...

https://www.menards.com/main/hardware/fasteners-connectors/screws/machine-screws/midwest-fastener-reg-4mm-0-70-x-6mm-phillips-drive-stainless-steel-flat-head-machine-screw-2-count/87236/p-1444440170678-c-8933.htm

WARNING: I HAVE NOT PRINTED THIS YET SO USE AT YOUR OWN RISK!