Temp tower PLA, PETG, ABS

This is a remix of Tempreature tower by Tronnic. I've made a tower for ABS and added small texts to the bases of towers which says in wich filament it was printed with. If you have any questions or suggestions, write them in the comments or message me. I will be happy, if you leave some positive feedback :)

Original objects: https://www.prusaprinters.org/prints/4667-all-in-one-temperature-bridging-tower-pla-petg-gco

f you want to slice it, you will need to add some commands to a custom g-code setting. Simply find Gcode settings and then look for Before Layer change. You will need to replace that text with one of those (don't paste there the name of a filament). I know, it works with Prusa slicer. Haven't tried any others yet.

PLA

;BEFORE_LAYER_CHANGE
G92 E0.0
;[layer_z]
{if layer_z==1.20} M104 S190 M109 S190 {endif}
{if layer_z==11.20} M104 S195 M109 S195 {endif}
{if layer_z==21.20} M104 S200 M109 S200 {endif}
{if layer_z==31.20} M104 S205 M109 S205 {endif}
{if layer_z==41.20} M104 S210 M109 S210 {endif}
{if layer_z==51.20} M104 S215 M109 S215 {endif}
{if layer_z==61.20} M104 S220 M109 S220 {endif}
{if layer_z==71.20} M104 S225 M109 S225 {endif}
{if layer_z==81.20} M104 S230 M109 S230 {endif}

PETG

;BEFORE_LAYER_CHANGE
G92 E0.0
;[layer_z]
{if layer_z==1.20} M104 S220 M109 S220 {endif}
{if layer_z==11.20} M104 S225 M109 S225 {endif}
{if layer_z==21.20} M104 S230 M109 S230 {endif}
{if layer_z==31.20} M104 S235 M109 S235 {endif}
{if layer_z==41.20} M104 S240 M109 S240 {endif}
{if layer_z==51.20} M104 S245 M109 S245 {endif}
{if layer_z==61.20} M104 S250 M109 S250 {endif}
{if layer_z==71.20} M104 S255 M109 S255 {endif}
{if layer_z==81.20} M104 S260 M109 S260 {endif}

ABS

;BEFORE_LAYER_CHANGE
G92 E0.0
;[layer_z]
{if layer_z==1.20} M104 S230 M109 S230 {endif}
{if layer_z==11.20} M104 S235 M109 S235 {endif}
{if layer_z==21.20} M104 S240 M109 S240 {endif}
{if layer_z==31.20} M104 S245 M109 S245 {endif}
{if layer_z==41.20} M104 S250 M109 S250 {endif}
{if layer_z==51.20} M104 S255 M109 S255 {endif}
{if layer_z==61.20} M104 S260 M109 S260 {endif}
{if layer_z==71.20} M104 S265 M109 S265 {endif}
{if layer_z==81.20} M104 S270 M109 S270 {endif}