Gap test fish

間隙測試-魚
1.這是一個測試間隙精準度的STL檔案，共包含了4種時常用於我的設計中的可動結構。
2.在印我的其他作品前先試印這個檔案，以調整gcode設定，在確定4個部分都可轉動時，就以相同的設定來列印我其他作品，這樣可增加列印成功率。
3.以調整流量方式來控制可動零件間隙。
4.流量降到90以下還無法成功列印，可能是機器本身調校問題。
5.不管列印完成品能否轉動還是可以拿來當鑰匙圈，別浪費了材料。

1. This is an STL file for testing the accuracy of the gap, which contains 4 kinds of movable structures that are often used in my design.
2. Try printing this file before printing my other works to adjust the gcode settings. When confirming that all 4 parts can be rotated, print my other works with the same settings, which can increase the printing success rate.
3. Try controling the gap of movable parts by adjusting the flow rate.
4. If the flow rate drops below 90 and the result still fails, it may be due to the adjustment problem of the machine itself.
5. Whether it can be turned or not, it can be used as a key ring, do not waste materials.