Robo R1 R1+ Hemera Fan

This is a remix of 2 fans. The original design #RoboHemera (https://www.thingiverse.com/thing:4043642) had a good designed extruder setup for the Robo R1+, but the cooling fan wasn't working well for me. so I remixed it with the Hemera 5015 fan shroud.

Also, check out my cable chain: https://www.thingiverse.com/thing:4159249

I hacked this together in Tinkercad. The Hemera fan shroud needed to be widened and then splice into the RoboHemera connecting section. It may not be pretty, but it does work well. There is a picture of the MatterControl space guy to show the differance.

I made the fan to go around the silicone sock of the hot end. You will notice I had to make the heater cartridge and thermistor come in from the open side.

There are 2 STL's;
1 = just the fan
2 = has a small support block on the fan. This is so you can add supports from the bed only.