February 28, 2020
Description
This is an easy and modular way of an Table Arc, it is not stable like the others but its functional and got way less printing time and Material usage.
Stability for about 1000mm tested with 11 Arc Elements.
Table 700mm width 20mm thickness
Arc 6x TPU white, 2x PET-G yellow
Verbinder 14x PLA white
Tischhalter 2x PLA glow
Screw 2x PLA black
Arc-Pieces 150mm (choose your own modular lenght) using mor PET-G or PLA instead of TPU will increase the stability and height of your arc.
Verbinder are ment to be inside the top holes of the Arc Pieces.
Tischhalter is the clamping unit on the Table with Freespace for an LED Stripe trough it. Table thickness 20mm, thinner plates will need Screws or Pieces to close the Gap. Screw Holes need to be re-cutted after Printing... thread is not working propper inside...
I used an Paulmann LED Strip (10.5mm/2.5mm and 1.1m)
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
Lemingg
