AT2020 Mic Pop Filter Clip-on Mount

This is a minimalistic clip-on pop filter mount for the AT2020 USB+ microphone. The microphone sits on my desk, so I don't like to use those bendable pop-filter mounts that take up a lot of space.

Here is the pop filter I purchased: https://www.amazon.com/gp/product/B008AOH1O6

I drilled two holes into the pop filter and attached it to the 3D printed clip on mount using some M3x20mm screws You can probably get away with shorter M3 screws such as M3x14mm.

Comes in two versions: 7mm depth (the pop filter is 7mm away from the microphone) and 1inch (the pop filter is 1 inch away from the mic). The 1 inch version is more effective at removing pop sounds, the 7mm is more minimalistic. Both versions are better than not having a pop filter at all.