March 12, 2020
Description
This is a two part print.
Rim was printed in PLA but other hard material works as well.
Tyre was printed with BIO-TPU as a tyre should be soft, less infill gives softer tyre, everything depends on the load it will carry and your preferences.
there's a clearance of .3mm in diameter between tyre and rim (rim is .3mm smallervthen tyre)
additional needed parts, screw M6 lengt around 70mm and a nut, depending on the suitecase a washer on each side of the wheel might be needed.
If you like what I'm doing, please consider supporting me
https://www.buymeacoffee.com/taguvove
License:
Creative Commons - Attribution
chipen83
