April 6, 2020
Description
3D Printer Resin Parts UV Light Curing Table
EDIT: 4/8/2020
Added Schematic
Added Pictures
EDIT: 4/7/2020
Added code for relays that or activated with a LOW signal
Ardunio_Nano_Stepper_28BYJ-48_Potentiometer_Low_Activated_Relay.zip
Edit: 4/6/2020
Moved speed pot away from screw hole.
Added base without push button and relay mount.
170mm wide Smaller size of Urzas_creations "Rotating Platform: Arduino meets 3D Printing | Stepper Motor 28BYJ-48 + ULN2003" https://www.thingiverse.com/thing:4094599/comments.
Added Screws to hold top on
Pot Speed Control using Robojax ecellent code "Control Speed of Stepper Motor 28BYJ-48 with potentiometer - Robojax" https://robojax.com/learn/arduino/?vid=robojax_stepper_28BYJ-48_pot_speed.
Soon as I get the schematic done I will post here.
At power on a output is turned on ( Mini 1/8 Audio Aux mount) Optional (It turns my UV light on and off) Turn Table starts and runs 15 minutes ( Changeable in the code)
after 15 minutes table stops, Output turns off to Mini 1/8 Audio Aux mount
A buzzer sounds for 60 seconds ( Changeable in the code) Then program is ended.
Optional for safety, you can wire and use a push button to activate a relay that self latches to hold power to run everything. after buzzer ends it will release the relay. this is NOT in the Code Yet.
Parts Used: This list is just a list. I get nothing from these links, Search for better deals.
Arduino Nano 3.0
Mini Rocker Switch 117S 2-Pin 250V/3A 125V/6A ON-OFF Panel Mount Black
Panel Cutout Dimensions: 13.5mm x 9mm (0.53" x 0.35")
https://www.ebay.com/itm/192728438418
10K OHM Linear Taper Rotary Potentiometers B10K POT with Black Knobs
5V Small Stepper Motor 5mm Shaft 0.0879 deg/step and ULN2003 Driver 35g 28BYJ-48
5V Single 1 Channel Relay Module Board Shield For Arduino (Optional Saftey Relay)
RED small N/O Momentary 12mm push button Switch (Optional Saftey Relay)
3.5mm Female Stereo Audio Jack
Female DC Power Jack Plug 5.5 x 2.1mm Panel Mount
608-2RS Ball Bearing 8x22x7
Power Supply Adapter AC to12V Volt DC 2.1mmx5.5mm tip
Black Mini Micro Cross Phillips Head Self Tapping Wood Screw M3 x6mm
License:
Creative Commons - Attribution - Non-Commercial - Share Alike