LuxPro Lightsaber Collapsable Flashlight Mod

After doing the remix for the OLight ($15) I wanted a cheaper alternative, and I found these at 4 for $15 on amazon:
https://www.amazon.com/dp/B0195L3D80/ref=twister_B07ZTX739B?_encoding=UTF8&psc=1&coliid=I2FYLH0Y80NPOG&colid=126JPHIC04RJA

And $5 for one at Lowes, or on amazon:
https://www.amazon.com/LUXPRO-LP130-Lumen-Keychain-Renewed/dp/B07YRR37VW/ref=sr_1_8?dchild=1&keywords=lp130+flashlight&qid=1586475321&s=sporting-goods&sr=1-8

https://www.lowes.com/pd/Lux-Pro-Black-Matte-Metal-Keychain-Light/1000183849

This isn't quite as bright as the OLight, but I think its a nice compromise. The Ring is used to make the light focus as tight as possible to make sure it goes as far down the blade as it can, and the plug friction fits everything together. Depending on your printer settings you may want to over extrude the plug a little to make everything tight.

This needs to be the shorter blade from the "Sith" original model, linked below, but when you print the blade Vase_5 needs to be 205mm long, that will make everything the same level at the end. I hope this makes sense, because it really makes the results nicer.
https://www.thingiverse.com/thing:3668138

Other two matching handles:
https://www.thingiverse.com/thing:3606120