Prusa MINI 1/4-20 Webcam Mount

A quick and dirty way to mount a 1/4-20 compatible webcam (Logitech C930 in my case) to your Prusa MINI.

You'll need:

• 1/4-20 x 3/4" bolt to mount the camera to the arm.
• M3x10mm + washer to replace the M3x8mm you remove from the bed plate.

Remove the M3x8mm from the bottom of the Y axis plate. Slip the camera arm over the Y axis plate (lifting slightly on the bed for clearance. Once in place, the M3 standoff from the bed should slot into the camera arm. Just replace the M3x8mm bolt with a Mx10mm + washer to secure.