Garmin Fenix 5, 5x, 6, 6x watch Handlebar Mount

A redraw of Merlin699's excellent Fenix 5 handlebar mount as a friend needed one for the Fenix 6 which is narrower between the pins. If you have some available, add a strip of self-healing tape or something rubbery between the handlebar and the mount to add a little grip.

####Update 2021-01-03
The Stem-mount parametric model didn't produce flat sides with larger stem sizes which made it hard to print. I've updated the .f3d file so it forces flat sides,

###UPDATED

I've included two properly parameterized Fusion360 f3d models so anyone can now create versions to suit their watch if there isn't already one here that suits. Simply open the Bar mount or Stem mount model as preferred in Fusion 360. In the SOLID tab click Modify > Change Parameters (or hit Ctrl+Shift+P). The three parameters that matter are marked as favourites:

HandlebarDiameter [Bar mount only]
The diameter of the bar that the mount will be fixed to. Values of 20mm to 40mm work fine

StemDiameter [Stem mount only]
The diameter of the bar that the mount will be fixed to. Values of 20mm to 50mm work fine

StrapWidth
The width of the strap for your watch. This will be one of Garmin's QuickFit straps and therefore will be 20mm, 22mm or 26mm (see picture)

WatchBarsOD
The measurement across the strap bars on the main watch body. This seems to vary between about 50mm to 54mm depending on the model. (see picture)

Just modify these values to suit your watch and you should see the model change shape accordingly. Then right-click the named body in the browser tree and save as STL.

If you're not sure about anything then fire me a message and I'll help.

2020-11-10 Major update
Redrawn bar mount and stem mount models to make them properly parametric for simple customisation.

Added 6x stem mount STL for 32mm diameter stem

2020-11-10 update
Added model for fenix 5x. Quickfit 26 strap. Measurement across the outside of both bars is 54mm on the watch

2020-06-20 update
Added model for fenix 6x. Measurement across the outside of both bars is 53mm on the watch

2020-05-03 update
Beefed up the clip ends somehwat and expanded the fillet at the thumb clip end. Made the main body fillet smaller to make the arms a little more flexible.

fenix5 version suits the fenix5 (not the 5S or 5X). Measurement across the outside of both bars is 54mm on the watch, 53.5mm on the model to allow for a little tension.

fenix6 version suits the fenix6 (not the 6S or 6X). Measurement across the outside of both bars is 50mm on the watch, 49.5mm on the model to allow for a little tension.