Customizable TV Remote Holder

Many home media centers seem to have multiple remotes. It is so easy to lose remotes. It is helpful to have a central location for them. Using a basket to hold remotes forces you to dig around for the remote you want. This design holds the remotes at a slight angle making them easy to access in a sleek way.

This design is customizable with Thingiverse Customizer. It allows you to configure 2-6 remotes setting the width and depth of each slot. See the instructions below for tips on how to customize your own design. If you are interested in a pre-made generic design see the original version: https://www.thingiverse.com/thing:3311397.

Please post a comment if you have any comments, questions, or design tips.

Customizer Instructions:

• Open file in Thingiverse Customizer or OpenSCAD: https://www.openscad.org/downloads.html
• If Thingiverse Customizer is not rendering correctly right-click "Create Thing" and open in new tab.
• Order remotes from shortest to tallest
• height_1 = 25-33% of height of remote 1
• height_2 = 25-33% of height of last remote
• Measure width and depth of each remote. Add a few millimeters (~3-7mm) of tolerance to each dimension.
• Set the width and depth of remote compartments not used to 0
• (OpenSCAD): Preview, render, and export to .stl.