What's this

It's an adaptive phone holder for 68..100mm width smartphones. I've designed it to mount my smartphone on the bicycle handlebar tightly and securely.

Warning! Do not over-tighten your smartphone inside!

Sample handlebar 31mm adapter is included (2BoltsHandlebarHolder_v5.stl), but you can use your own adapters with this holder. Mount standard is 2x M4 countersink screws, distance is 25mm between their axes.

You'll need additional spare parts in order to assemble that. See assembly instructions below.

Fusion360 sources included.

Assembly instructions

It is recommended to glue up rubber stripes at the inner sides of this holder in order to improve grip (see real photos). Old bicycle tire inner tube works well for that.

1. Insert M5 nut into the moving part of BicyclePhoneHolder_v4.stl and fix it by applying BicyclePhoneHolder_v4_-_nutcap.stl.
2. Insert M5 bolt into BicyclePhoneHolder_v7_-_knob.stl and twist it into the nut through both static and moving part of BicyclePhoneHolder_v4.stl.
3. [optional] Insert M4 nuts into 2BoltsHandlebarHolder_v5.stl and attach it to the holder and handlebar with corresponding M4 screws.

Spare parts required:

For the holder itself:

• 1x M5 nut
• 1x M5x35 or M5x50 (longer for the wider smartphone) bolt

For the sample handlebar mount:

• 4x M4 nut
• 2x M4x12 countersink screws
• 2x M4x20 screws with inner hexagon head