Summary

I own a 1997, 1999, & 2001 Jeep Wranglers. Every couple years I'll have a knob break during a really cold winter day when I try to use them, so I decided to make my own!

Dimensions taken directly from OEM Jeep Wrangler knobs, using a set of vernier calipers and some good old fashion best guesses.

Each jeep has at least 1 knob at this point, put spares in each in case they ever give out!

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%</p></div></p>                                                    <strong>Filament:</strong> any PLA                any                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The knob is a tight fit when going on, better to be too tight than too loose especially with PLA.</p><p>I use the Creality Slicer, so these settings for the support material:<br>Support type: Touching Buildplate<br>Fill Amount: 40%<br>Distance X/Y (mm): 0.8<br>Distance Z (mm): 0.15</p><p>Tested and proven on my 1997 Jeep Wrangler.</p></div>

Jeep Wrangler Air Knob_'97

Jeep Wrangler Air Knob_'97

Related Models