Pelican Kayak Hatch Bin

This is an insert I created to fit inside the smaller hatch on my Pelican Enforcer 120x. From the factory, the hatch is just an open hole into the hull, so after a while, anything you place in the hatch has slide around the hull and is now completely out of reach. With this insert, you can throw some smaller items in and keep them readily accessible. The same hatch is used on the majority of Pelican's SOT kayaks and depending on hull depth, this insert should fit in all of them.

The bottom attaches to the walls using 6 M3*5mm machine screws.

EDIT 5/12/2021: Added a v2 of this model with added rigidity for both the walls and the bottom. The bottom is now 2mm thick with 1mm thick rails for added strength. The walls now have 1mm thick rails to better prevent deforming under load. The slot for the lid's locking mechanism has been extended and rounded to allow for better clearance.

Want to buy me a beer?
paypal: https://www.paypal.com/paypalme/tcaulfld
cashapp: $tristan.caulfield
bitcoin: 33AoRVSjMeLvpxz1Y7y51XN9g2bf4cYQxH