Snapmaker 2.0 power supply backplate 40 mm fan

This is backplate for the power supply on snapmaker 2.0 that can fit a 40mm fan.
Used the same screw that was used on the original steel back plate.

It is inspired by:
https://www.thingiverse.com/thing:4098379
Made a more snug fit and a more sturdy design.

The fan I used is a SUNON 40x40x10 24V and solder the old fan connector to the new fan.
https://www.amazon.co.uk/Ventilator-40x40x10mm-27dBA-Sunon-KDE2404PFV2-11AB/dp/B07CV6VTWB

Assembly

1. Screw the fan on to the back-plate by using the screws and bolt used on the original black-plate
2. Connect the fan to the connector on the circuit board.
3. Mount the Back-plate on to the power unit with same screw used on the original back-plate.