One Piece Dracule Mihawk Black Knife / 海賊王鷹眼黑刀夜

video https://youtu.be/bST5LKXAGq4

這次的作品並不適合初學者，它沒有完整的底部可以黏合，而且整體是細長型物件，如果直立放置的話容易列印時倒塌，影片中的擺放角度只是參考用，我在列印過程並不是很好，有太多拉絲而且也有印不太好的地方，因此如果你有更合適的列印方法也歡迎告訴我喔。

大部分都是依靠打磨來修整不完美之處，如果你也想製作的話不建議在縮小喔，目前的尺寸已經有點小了，有一些特徵已經不是很明顯了，如果再縮小的話會增加列印的失敗率，而且也容易在拆支撐的時候損壞物件喔。

如果你喜歡我的作品及影片，也能透過這個方式支持我 https://www.paypal.me/fr3dp

This work is not suitable for beginners, it does not have a complete bottom to stick, and the whole is a slender object, if it is placed upright, it is easy to collapse during printing, the angle of placement in the video is for reference only, I am not in the printing process Very good, there is too much brushing and there are also places where the printing is not very good, so if you have a more suitable printing method, please let me know.

Most of them rely on sanding to repair imperfections. If you want to make them, it is not recommended to reduce it. The current size is already a bit small, and some features are not obvious. If you reduce it, it will increase printing. Failure rate, and it is also easy to damage objects when removing the support.

If you like my works and videos, you can also support me in this way https://www.paypal.me/fr3dp