July 20, 2020
Description
This is spur and pinion gear set for Quanum Vandal/ FTX Vantage/ VRX Spirit 1:10 4WD buggy. Spur gear - 65T, pinion gear - 23T.
You need to dreel a hole for 3.175mm motor shaft and appropreate hole for a fixation pin.
I did use petg filament.
upd 29.08.2020
Added vrx_spirit_spur_65t_p1.stl and vrx_spirit_spur_65t_p2.stl, this two parts need to be glued together, it was made for better printing quality with nylon.
upd 21.07.2020
Added spur for printing without support, spur separated by two parts for gluing and pinion with strengthened walls.
More on https://vk.com/molnija3d and https://vk.link/molnija3d
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
molnija3d
