Furniture foot for garden chairs & garden loungers factory / Möbelfuß-Fabrik für Gartenstühle & Gartenliegen

This is a parametric design to create furniture feet for garden chairs & garden loungers. It is based on the impressive "Cap that Hole" by Ziv Botzer https://www.thingiverse.com/thing:1943463.
I made it to create furniture feet for garden chairs and loungers which are skew (not 90° angle).
The skewness is only applicable to hole dimension 1. You have to choose the hole dimensions apporpriately. Take a triangle ruler to get the correct angle of your chair.
If you have a chair with the foot standing other than 90° I think this design is beneficial because it is less susceptible for wear.

I had good results with adding 0.3mm for the fins on each side. That is I chose the plug dimensions 0.6mm bigger than then hole dimensions.

Please follow these easy steps to get the STL files you want:

1. install openSCAD: https://www.openscad.org (it is free of charge)
2. open the scad file of this thing
3. adjust the parameters as you like (inner diameter, outer diameter, etc.)
4. render the design by pressing F6
5. export to STL by pressing F7

Known issues: if you want to work with a square foot, you have to choose rectangle and set hole dimension 1 and 2 to the same value.