Panda Props Printermods Grey creality extruder spacer for DD

This is the adapter for the grey "Creality New (non-geared)" extruder used in the Printermods Direct Drive conversion. Unfortunately, their model doesn't work at all.

So I measured my extruder with digital calipers and modelled my own.

Here is my review of the direct drive kit
https://youtu.be/NK7CZMf868Y

This is the original link to the non compatible printed model you are supposed to use, but it's the wrong shape and size.

https://printermods.freshdesk.com/support/solutions/articles/60000601747-mdd-hot-end-extruder-combinations-matrix

This the link to the Creality grey extruder
https://www.amazon.com/Creality-Upgraded-Extruder-Assembled-Capricorn/dp/B088YRB8YB

Keep in mind that the printed spacer may block the bolt location for the lever spring. On my extruder I had to use a different bolt on the inside of the spring to create room to mount the extruder to the Printermods bracket.