August 13, 2020
Description
This helping Popsicle holder I designed for my small one.
Always complaining about cold that is coming from the ice Popsicle, I decided to give a hand and made this kind of holder.
It fits small ice Popsicle in size of ~10 cm and diameter of 3 cm.
After cutting the nylon top, just put the Popsicle in, and squeeze the handles.
Print this design twice, and connect between them using an M5 screw and nut. You will need a 15 to 18mm long screw.
Update:
Designed a stronger version of the holder.
The thin area around the axis seemed to be too weak.
Filled the area up to the outer shape diameter.
You'll need an M5x25 mm screw to connect both sides.
License:
Creative Commons - Attribution
Artelion
