Nano SkyHunter Wing Lock with 14mm camera mount

Remixed the NSH wing lock to hold a rear facing camera, but then modified my camera mount also so it could be used for forward facing rear camera also. It should fit any of the Nano 14mm wide cameras, I have a Caddx Turbo EOS2 in the pictures, but a Foxeer Toothless2 Nano would also fit. the side holes are for M2 screws to hold the camera in .place and you should be able to pivot the camera up or down a little if needed.

** 18 Aug 2020 Update
I added a second version, V2, that has 2mm spacers at the base to sit a little more flush on the wing, and also removed the middle section of the tower to allow air flow through, or to run wires through if you want to use it for forward facing.