Emax ES9051 pan mount for nano camera

Simple mount for the 14mm size cameras, specifially the Caddx Turbo EOS2 and the Foxeer Toothless2 Nano, but would likely fit others. The only real difference is the back wall is set further back for the Foxeer due to the further forward mounting screws on that camera.

holes on the bottom of the mount are spaced for the small 4 prong servo arm that come with the Emax ES9051 servo, 2 holes for the Caddx and 3 holes for the Foxeer.

**18 Aug 2020 Update
I added Foxeer Toothless2 Nano V2 that removes the back plate. Either should work just fine, but my camera has been beat up and sometimes needs a "massage" of the back of it to get it working again.

Also added a generic 14mm camera mount that is open on the back to fit any 14mm wide camera.

**15 Nov 2020 Update
I added Caddx Loris mount that has the camera set back a little so that the lens sits over the servo pivot point.