October 25, 2020
Description
This is a protective bottom plate for the FullspeedRC Tinypusher. I was a bit hesitant since the model comes with absolutely no protection on the bottom and I was afraid to break the ESC in case of landing on gravel or similar. That's why I decided to model this protective bottom plate.
It is intended to be printed from TPU. For mounting you will need a bit longer screws - I used M2x5mm screws and they work perfectly. I also opted to use metal screws instead of the plastic ones that were included, since in my experience the plastic ones break very easily.
License:
Creative Commons - Attribution - Non-Commercial
.png&w=256&h=256&output=webp&q=100&n=40 "stylesuxx avatar")
stylesuxx
.png&w=256&h=256&output=webp&q=100&n=40&default=https://cdn.thingiverse.com/assets/83/c3/f4/3b/15/8753daefc391ba00fdc26d531a449902 (1).png "stylesuxx profile image")
