November 13, 2020
Description
Designed this plate to hold 5G emax servo on top of the Split Mini2 using keithluneau's Split Mini Pan/Tilt. Designed to have M2 screws hold the plate and the board to Keith's bottom plate, then the servo can be screwed to the tabs on the top plate.
*I used 2each plastic M2 washers, the kind that come with many micro FPV cameras, on the 2 screws for the SD card slot side to keep the top plate from pushing down on the SD card housing on the PCB.
License:
Creative Commons - Attribution - Non-Commercial
aGard83
