November 14, 2020
Description
I really love the original case. But when you have it on a desk, the ergonomics aren't that good. Trying to turn the dials can be very uncomfortable and on groups.io/QRPLabs, Larry N6NC described the same problem. He asked if some one all ready made a 3D printed stand for the QCX+ and I showed hem the tilting feet I made for my uBITX. These are rather large so I took a moment design a dedicated set for the QCX+.
It contains out 2 kind of feed (one with a 90dgr angle, one with a 120dgr angle) and 3 different heights of the lifting booms.
Also it has 2 drilling templates for drilling the 2.5mm holes and used a M3 thread cutter.
But short M2.5 bolds can be used also (just look out for the display and display PCB)..
More info : https://www.ph2lb.nl/blog/index.php?page=qrp-labs-qcxp#tilt
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
lex_ph2lb
