Inspired by mask clip design: https://www.thingiverse.com/thing:4635429/
But found the above design to be a bit fragile, especially the hooks are easily to break off.
So I have decided to design from scratch.
I am OK if you are printing any of my models for sale. Please consider a small donation. Thank you!
----------------------------
UPDATE 02/28/2021 to Version:
----------------------------
Added extra reinforcement to the arms:
- V3_1-nose-clip-Extended-ArmsReinf.stl
----------------------------
UPDATE 01/10/2021:
----------------------------
Current version: 4 beta
Per user requests added more curvature to the model in the area of nostrils & cheek.
All ver. 4 beta variants are for Medium thickness mask (1.5mm .. 2.0mm gap);
- V4beta-NarrowNormalNose-ArmsMedium.stl
- V4beta-NarrowShortNose-ArmsMedium.stl
- V4beta-WideLongNose-ArmsMedium.stl
- V4beta-WideNormalNose-ArmsMedium.stl
- V4beta-WideShortNose-ArmsMedium.stl
- V4beta-XWideLongNose-ArmsMedium.stl
Please try it out and give me your comments if anything else needs to be added.
Please stay tuned for more updates.
----------------------------
UPDATE 12/09/2020:
----------------------------
Current version: 3
Variants:
- Thin material mask (0.8mm ... 1.3mm). V3-nose-clip-Extended.STL
- Medium thickness mask (1.5mm .. 2.0mm gap). Filename: V3-nose-clip-Extended-MediumMask.STL
- Thick material mask (2.2mm .. 2.4mm gap). V3-nose-clip-Extended-ThickMask.STL
Modifications are added per community comments.
- extended arms for better contact with the mask
- added the model variants: thin, medium, thick - different gaps between nose clip body and the arm for better contact.
You may add a little heat (lighter fire for a sec if PETG, or warm-to-hot water if PLA) for a short period of time to make sure the clip fits your nose well.
You may use small grit sand paper to smooth corners, etc since the clip is going to touch face skin.
Please feel free to post comments, requests, makes, remixes, etc.
Thank you!
---------------------
Please support my personal project https://everhint.com by visiting it.
Everhint is a daily updated collection of Career hints, Interview preparation tips, Coding interview examples, etc.
----------------------------
UPDATE: 11/28/2020:
----------------------------
Uploaded version with "cutoff" in the front for more nose space.
( File: nose-clip-CUTOFF-vs.stl )
UPDATE: 11/26/2020:
Uploaded version 2.0:
- increased front space for the nose,
- added a bit of a smoothness to the model,
- added 2 small frontal bumps to prevent mask to slip off
( File: mask-nose-clip-L-Ver2.stl )
Attaching size "L" model. Feel free to modify it, post remixes, comments, etc.
SUGGESTIONS:
- I would recommend to print the model up side down,
- Once the model is printed, you may heat it by holding 1-2 secs above open fire to deform the way it sits more comfortable.
vshamgin
