Summary

A replacement port cover plate for the The C64 and the The VIC 20, with a very unassuming power button, and a hole for a 3.5mm stereo jack for a console (serial) port.

This prints as one object, including the button.

Print Settings

Printer Brand:

Ultimaker

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p><a rel="nofollow" href="https://ultimaker.com/" target="_blank">Ultimaker 2</a></p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.06, 0.25mm nozzle</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> Noname ABS                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The button prints in place together with the plate, and may need to be fiddled with a bit to break loose. I have not tried printing this with a 0.4mm nozzle, but at most you may need to change the margins a bit.</p><p>For the serial port, I follow the convention DTE TX on tip, DTE RX on ring and Gnd on sleeve, so connect the tip to RX inside the The VIC 20, and the ring to TX. Use a 3.3V serial-to-USB adapter! Even though it might conceivably be safe to insert/remove the plug with the adapter or computer powered, just don't. There's no reason to do so.</p><p>OpenSCAD source (completely uncommented) is included.</p></div>

Port Cover Plate for The VIC 20 and The C64

Port Cover Plate for The VIC 20 and The C64

Related Models